Sames | 01D140 Diaphragm circulating pump

Description

Reduced compressed air costs
Minimal operating & maintenance costs
Flexible integration into existing systems

Performance

♦ High frequency operation up to 8 cycles/sec
♦ Compressed air savings of up to 55%
1 Stalling free conception with bistabke latching valve

Productivity

2 Flexible integration into existing systems with 90° rotatable inlet & outlet connection ports
3 Extremely compact design with spring-loaded media valves
♦ Minimal changeover times ensure uniform flow

Sustainability

4 Long service life thanks to low-wear pneumatic ceramic valve
5 Rinsing-optimised surfaces on the side cover and diaprhagm with minimal dead zone
6 Media valves with sealing rings, to limit paint shearing

01D140 is designed for fluid transfer and small circulating systems with multiple guns. His conception in Stainless steel makes the eqiupment compatible with all types of paint .

This pump is characterised in particular by his extremely low compressed air consumption, low pulsation, excellent flushabibility, process reliability, long service life, ease of maintenance and small & compact design.

01D140 is mainly dedicated for solvent base application with a built in PTFE diaphragm
01D140E for waterborne abrasive product applications such as porcelain and ceramic, the 01D140E is designed with specific EPDM diaphragms

Technical data table

Designation	Value	Unit: metric (US)
Pressure Ratio	1:1
Maximum Air Pressure	8 (116)	bar (psi)
Maximum Temperature	65 (149)	°C (°F)
Sound Level	68	dBa
Fluid Volume per Cycle	140 (4.7)	cc
Free Flow Rate	60 (15.6)	l/mn (gal/mn)
Maximum Viscosity	15000	cps
Fluid Outlet	3/4''
Fluid Inlet	3/4''
Length	232 (9.1)	mm (in)
Height	174 (6.85)	mm (in)
Width	130 (5.1)	mm (in)
Weight	6,2 (13.2)	kg (lbs)

Equipment

Designation					Part number
Pump 01D140					144907010
Pump 01D140E					144907015

Accessories

Designation					Part number
Fitting M3/4 M26x125 SST					050102445
Stainless steel Suction rod Ø23 plunging tube length elbowed 570 mm					149596150
Stainless steel Suction rod Ø23 plunging tube length 1000mm elbowed (for 200 liters drums)					149596160

Spare Parts

Designation					Part number
Diaphragm kit for 01D140					144907011
Ball valve kit for 01D140					144907012
Seals and Springs kit for 01D140					144907013
Pneumatic valve kit for 01D140					144907014
Diaphragm kit for 01D140E					144907016
Pneumatic seals kit for 01D140					144907018

Documents

Select all documents

01D140

Format : application/pdf
Size : 400Ko

Select the document

General Catalog (For North America only) Sames

General Catalog North America

Format : application/pdf
Size : 3Mo

Select the document

01D140 & 04D140 Pump Preventative Maintenance (for NA only)

Format : application/pdf
Size : 209Ko

Select the document

01D140 Pump Spare Parts Sheet (for NA only)

Format : application/pdf
Size : 1Mo

Select the document

Catalog Airspray Range Sames (English version)

Format : application/pdf
Size : 14Mo

Select the document

Instruction Manuals

Select all documents

01D140 01D140E | User manual

Format : application/pdf
Size : 2Mo

Select the document

Materials

Primer Epoxy

Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.

Primer Epoxy Multi-Component

Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.

Primer Polyurethane Multi-Component

Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.

Primer Water-Based

Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.

Enamel Water-Based

Enamel paint air dries to a hard, typically glossy finish, and is used for coating surfaces that are outdoors or otherwise subject to hard wear or temperature changes.

Water-Based Stains

Water-Based Wood Stains have all the advantages of oil-based stains. They spread easily, can be repaired, blend effortlessly & have plenty of open time. The thicker formula allows for controlled penetration, which will reduce blotching on softer woods such as Aspen, Pine & Maple.

Solvent-Based Stains

A wood stain consists of a colorant suspended or dissolved in an agent or solvent. Colored, or ''stained", finishes do not penetrate the pores of the wood to any significant degree.

UV Material Epoxy Multi-Component

UV-resistant epoxy systems mixed with hardener cure faster & in moist conditions.

UV Material 100% Solid

UV coatings can be formulated up to 100% solids so that they have no volatile component that contributes to pollution.

UV Material Water-Based

Water-based UV coatings can be considered aesthetically equivalent to bi-component acrylic & polyurethane solvent-based coatings. The range is composed of both pigmented & transparent products.

UV Material Epoxy

UV curable epoxy systems do not require the addition of curing agents. They cure within minutes, or even seconds, and have unlimited working times.

UV Material Polyurethane Multi-Component

The UV polyurethane multi-components are especially designed for very strong UV stability. Mixing with hardener gives very high durability & UV resistance.

UV Material Polyurethane

The UV polyurethanes are especially designed for UV stability, The coating is long lasting, offers excellent substrate protection, provides an attractive finish & is user-friendly.

Top Coat Polyurethane Multi-Component

Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.

Top Coat Epoxy

Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.

Top Coat Epoxy Multi-Component

Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.

Top Coat Water-Based

Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.

Top Coat Polyurethane

Polyurethane Top Coat gives a durable, high gloss finish.

Acid Catalyst Polyurethane Multi-Component

Multi-Component Epoxy Acid Catalyzing (AC) systems require a hardener or catalyst to dry/cure, which works by starting & maintaining the binder's curing process until the chemical reaction is complete. The solvent evaporates prior to & during the chemical reaction concluding a final film of lacquer, paint or filler. The catalyst is moisture-sensitive and requires a Flowmax® technology protection.

Acid Catalyst Epoxy Multi-Component

Multi-Component Epoxy Acid Catalyzing (AC) systems require a hardener or catalyst to dry/cure, which works by starting & maintaining the binder's curing process until the chemical reaction is complete. The solvent evaporates prior to & during the chemical reaction concluding a final film of lacquer, paint or filler. Curing times of AC products can be dramatically accelerated with heat application.

Metallic Epoxy

The newest metallic epoxy system on the market allows contractors to heighten the effects & make floors look three-dimensional.

Metallic Water-Based

Polyurethane water-based coatings offer a very high chemical/physical resistance & steel effect & are environmentally friendly.

Metallic Epoxy Multi-Component

A two-component 100%-solid epoxy blended with metallic pigments, Metal Fusion is self-leveling, allowing easy application & seamless floor surfaces.

Metallic Polyurethane

Polyurethane coatings are particularly recommended for application to surfaces subject to high levels of wear & tear where excellent chemical/physical resistance is required. The metallic parts will give a steel effect.