Sames | 04F240 Flowmax® Airspray Pump

Description

No piston overheating
No possibility of material leakage
Extended lifetime with high reliability

► Technical manual

Performance:

♦ High output to feed several guns in circulation
♦ High suction power for materials up to 4,000 cps
♦ Turbo air motor also available for continuous 24/7 use

Productivity:

♦ No lubricant cup due to Flowmax® Bellows technology - total sealing & dust free
♦ Ideal for moisture-sensitive catalyst & UV products

Sustainability:

♦ Triple chrome piston & cylinder, stainless steel ball & carbide seat for a long-term use
♦ Sleek design with few parts. The inversion system provides a fast changeover for a constant material delivery
♦ Bellows lifetime 10,000,000 cycles - up to 8 years

High reliability - Fluid section isolated from atmosphere.

Technical data table

Designation	Value	Unit: metric (US)
Pressure Ratio	4 : 1
Maximum Fluid Pressure	24 (347.8)	bar (psi)
Maximum Air Pressure	6 (87)	bar (psi)
Maximum Temperature	50 (122)	°C (°F)
Sealing Packing Bellows Polyethylene	♦
Cylinder	240 (8.1)	cc (oz)
Sound Level	< 82	dBa
Fluid Output at 30 cycles/mn	7.2 (1.9)	l/min (gal/mn)
Free Flow Rate	14.4 (3.8)	l/mn (gal/mn)
Air Consumption at 30 cycles/mn at 4 bar (60 psi)	10.3 (6.1)	m³/h (cfm)
Air Inlet	F 3/4" BSP
Fluid Outlet	M 3/8" NPS
Fluid Inlet	M 26x125
Number of Cycles per liter of products	4
Sealing Packing Upper and Lower GT polyethylene	♦
Height	104 (40.9)	cm (in)
Width	40 (15.7)	cm (in)
Depth	21 (8.3)	cm (in)
Wetted Shares: Stainless Steel	♦
Weight	27 (59.5)	kg (lbs)

Equipment

Designation	Setup	Atomization air regulator	Air regulator fluid pressure	Suction rod	Drain rod Ø6x8	Pump output filter	Part number
04F240 BARE PUMP	Bare	-	-	-	-	-	151795000
04F240 WALL-MOUNTED	Wall-Mounted	-	♦	-	-	-	151795100
04F240 WALL-MOUNTED WITH FILTER	Wall-Mounted	-	♦	♦	♦	♦	151795200
04F240 CART-MOUNTED WITH FILTER	Cart-Mounted	-	♦	♦	♦	♦	151795400

Accessories

Designation	Details		Part number
DRAIN ROD D16 S/S CONNECTOR 18X125	SST Drain rod with Ø16 hose and fitting 18x125	1	049596000
Stainless steel Suction rod Ø23 plunging tube length elbowed 570 mm	SST Suction rod with Ø25 hose - fittings 26x125 - 600mm length	2	149596150
Stainless steel Suction rod Ø23 plunging tube length 1000mm elbowed (for 200 liters drums)	SST Suction rod with Ø25 hose - fittings 26x125 - 1000mm length recommended for 200L drums	3	149596160
Bracket w. straps	Reinforced bracket (with straps) to mount the pump on a wall	4	056100199
TROLLEY 2 ARMS	Spare cart (2 handles)	5	051221000

Documents

Select all documents

Catalog Airspray Range Sames (English version)

Catalog airspray range sames kremlin

Format : application/pdf
Size : 14Mo

Select the document

General Catalog (For North America only) Sames

General Catalog North America

Format : application/pdf
Size : 3Mo

Select the document

Instruction Manuals

Select all documents

04F240 | User manual

Format : application/pdf
Size : 2Mo

Select the document

Materials

Primer Epoxy

Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.

Primer Epoxy Multi-Component

Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.

Primer Polyurethane Multi-Component

Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.

Primer Water-Based

Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.

Primer Polyurethane

Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.

CARC Water-Based

Chemical Agent Resistant Coating (CARC) is available in a water-based solution for environmental protection.

CARC Epoxy Multi-Component

Chemical Agent Resistant Coating (CARC) is a paint commonly applied to military vehicles to provide protection against chemical & biological weapons. The surface of the paint is engineered to be easily decontaminated after exposure to chemical warfare & biological warfare agents. The paint is also resistant to damage & removal by decontaminating solutions.

CARC Polyurethane Multi-Component

Chemical Agent Resistant Coating (CARC) can be two-component polyurethane paint commonly applied to military vehicles to provide protection against chemical & biological weapons.

Moisture-Sensitive Polyurethane Multi-Component

Catalyzed polyurethane clear coats and paints are prized for their durability and versatility around the world. They are used on everything from wood cabinetry, mill work and furniture to planes, trains, and automobiles. They are usually mixed with isocyanates in the hardener. The isocyanate component of polyurethane reacts with moisture in the air and form a hard crystalline structure.

UV Material Epoxy Multi-Component

UV-resistant epoxy systems mixed with hardener cure faster & in moist conditions.

UV Material 100% Solid

UV coatings can be formulated up to 100% solids so that they have no volatile component that contributes to pollution.

UV Material Water-Based

Water-based UV coatings can be considered aesthetically equivalent to bi-component acrylic & polyurethane solvent-based coatings. The range is composed of both pigmented & transparent products.

UV Material Epoxy

UV curable epoxy systems do not require the addition of curing agents. They cure within minutes, or even seconds, and have unlimited working times.

UV Material Polyurethane Multi-Component

The UV polyurethane multi-components are especially designed for very strong UV stability. Mixing with hardener gives very high durability & UV resistance.

UV Material Polyurethane

The UV polyurethanes are especially designed for UV stability, The coating is long lasting, offers excellent substrate protection, provides an attractive finish & is user-friendly.

Top Coat Polyurethane Multi-Component

Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.

Top Coat Epoxy

Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.

Top Coat Epoxy Multi-Component

Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.

Top Coat Water-Based

Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.

Top Coat Polyurethane

Polyurethane Top Coat gives a durable, high gloss finish.

Acid Catalyst Polyurethane Multi-Component

Multi-Component Epoxy Acid Catalyzing (AC) systems require a hardener or catalyst to dry/cure, which works by starting & maintaining the binder's curing process until the chemical reaction is complete. The solvent evaporates prior to & during the chemical reaction concluding a final film of lacquer, paint or filler. The catalyst is moisture-sensitive and requires a Flowmax® technology protection.

Acid Catalyst Epoxy Multi-Component

Multi-Component Epoxy Acid Catalyzing (AC) systems require a hardener or catalyst to dry/cure, which works by starting & maintaining the binder's curing process until the chemical reaction is complete. The solvent evaporates prior to & during the chemical reaction concluding a final film of lacquer, paint or filler. Curing times of AC products can be dramatically accelerated with heat application.

Metallic Epoxy

The newest metallic epoxy system on the market allows contractors to heighten the effects & make floors look three-dimensional.

Metallic Water-Based

Polyurethane water-based coatings offer a very high chemical/physical resistance & steel effect & are environmentally friendly.

Metallic Epoxy Multi-Component

A two-component 100%-solid epoxy blended with metallic pigments, Metal Fusion is self-leveling, allowing easy application & seamless floor surfaces.

Metallic Polyurethane

Polyurethane coatings are particularly recommended for application to surfaces subject to high levels of wear & tear where excellent chemical/physical resistance is required. The metallic parts will give a steel effect.