Sames | Airmix® Fluid Regulator

Description

Stainless steel design to handle water-based & solvent-based materials
High precision regulation
Remote control & optimal regulation accuracy

Fluid pressure regulators are used to reduce and balance the fluid pressure delivered from a pump to the applicator.
Fluid regulators should be placed as close as possible to the point of application.
The input fluid pressure should be higher than the regulated pressure.
For good control in a pneumatic regulated system, a stable air supply is required. Fluid supply pulsation should be minimized to help
ensure ideal regulator function.

Technical data table

Designation	Value	Unit: metric (US)
Maximum Fluid Pressure	250 (3625)	bar (psi)
Weight	4.1 (9)	kg (lbs)
Wetted Parts - Stainless Steel	♦
Height	27.5 (10.8)	cm (in)
ATEX Certification	ATEX/UKCA II 2G Ex h IIB T6 Gb X

Equipment

Designation	Type	fitting	Air inlet	Cartridge	Integrated Pilot	Part number
AIRMIX PILOTED REGULATOR 5-40 BAR W. PILOTE	Standard	2 x F 3/8 NPSM'	F 1/4 BSPP	-	♦	155271765
AIRMIX PILOTED REGULATOR 10-70 BAR W. PILOTE	Standard	2 x F 3/8 NPSM	F 1/4 BSPP	-	♦	155271750
AIRMIX PILOTED REGULATOR 10-120 BAR W. PILOTE	Standard	2 x F 3/8 NPSM	F 1/4 BSPP	-	♦	155271755
AIRMIX PILOTED REGULATOR 5-40 BAR W/O PILOTE	Standard	2 x F 3/8 NPSM	F 1/4 BSPP	-	-	155271760
AIRMIX PILOTED REGULATOR 10-70 BAR W/O PILOTE	Standard	2 x F 3/8 NPSM	F 1/4 BSPP	-	-	155271740
AIRMIX PILOTED REGULATOR 10-120 BAR W/O PILOTE	Standard	2 x F 3/8 NPSM	F 1/4 BSPP	-	-	155271745
AIRMIX PH REGULATOR 160B WITHOUT PILOT	PH	MF1/2''JIC	T2.7 x 4	-	-	155661575
PILOTED PH AIRMIX ® REGULATOR 160B	PH	2 x F 3/8 NPSM	F 1/4 BSPP	-	-	155271160
PILOTED AIRMIX ® PH REGULATOR 120B	PH	2 x F 3/8 NPSM	F 1/4 BSPP	-	♦	155271150
CARTRIDGE AIRMIX REGULATOR 120/40BAR	Standard	MF1/2''JIC	T2.7 x 4	♦	-	155661571
CARTRIDGE AIRMIX REGULATOR 240/70BAR	Standard	MF1/2''JIC	T2.7 x 4	♦	-	155661572
CARTRIDGE AIRMIX REGULATOR 240/160BAR	Standard	MF1/2''JIC	T2.7 x 4	♦	-	155661573
CARTRIDGE AIRMIX REGULATOR 300/200BAR	Standard	MF1/2''JIC	T2.7 x 4	♦	-	155661574
AIRMIX REG CARTRIDGE 120/40 BARS 1 PLATE	Standard	2 x F 3/8 NPSM	F 1/4 BSPP	♦	-	155271719
REG CARTRIDGE 240/70 BAR 2 PLATES	Standard	2 x F 3/8 NPSM	F 1/4 BSPP	♦	-	155271715
REG CARTRIDGE 240/160 BAR 4 PLATES	Standard	2 x F 3/8 NPSM	F 1/4 BSPP	♦	-	155271716
REGULATOR WO PILOT 40-200 BAR	Standard	2 x F 3/8 NPSM	F 1/4 BSPP	♦	-	155271728

Accessories

Designation					Part number
Wall bracket for regulator					155484010

Documents

Select all documents

General Catalog (For North America only) Sames

General Catalog North America

Format : application/pdf
Size : 3Mo

Select the document

Airmix® Catalog 2020 Sames

Format : application/pdf
Size : 7Mo

Select the document

Instruction Manuals

Select all documents

Airmix fluid pressure regulator with cartridge | User manual

Format : application/pdf
Size : 717Ko

Select the document

Airmix fluid pressure regulator | User manual

Format : application/pdf
Size : 717Ko

Select the document

Materials

Primer Epoxy

Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.

Primer Epoxy Multi-Component

Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.

Primer Polyurethane Multi-Component

Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.

Primer Water-Based

Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.

Primer Polyurethane

Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.

Anti-Corrosion Water-Based

Some anti-corrosion materials are available in water-based versions. These green paints have a longer dry time, but meet most environmental requirements & have excellent protective qualities.

Anti-Corrosion Epoxy Multi-Component

The Anti-Corrosion Epoxy Multi-Component product is highly resistant to marine & industrial environments, buried conditions, ground water, effluents, salt water & a wide range of oils & chemicals.

Anti-Corrosion Epoxy Zinc

Zinc coatings when applied to blasted steel provide excellent anti-rust spray coating corrosion protection, weathering protection & very good resistance to salt water & solvents. Inorganic zinc coatings provide excellent anti-rust corrosion protection when used in chemical plants, refineries & coastal or offshore installations. This coating can provide even better corrosion protection when a top coat is applied. Inorganic zinc coatings are compatible with epoxies, phenolics, acrylics, silicones & many other coatings.

Anti-Corrosion Epoxy Free Solvent

Solvent-free epoxy coatings are designed for long-term protection of steel & concrete structures against corrosion, abrasion & chemical attack. Operating temperature ranges from –40F to 1040F.

Anti-Corrosion Polyurethane Multi-Component

A two-component efficient coating product, used as first layer on metallic surfaces & in a wide range of painting systems. Forms an excellent quality anti-corrosive polyurethane film, ensuring the adherence between the surface & the next layer of the painting process.

Anti-Corrosion Epoxy

Anti-Corrosion Epoxy is applied for active anti-corrosive & anti-rust protection of iron & steel surfaces that are to be coated. It is extremely hard & resistant to friction. It is particularly resistant to diluted acids, alkalis, petroleum products, some solvents, water, sea water, and more.

Anti-Corrosion Epoxy High Solid

Used for the steel structures of steel pipeline, steel frame, bridge & plant facilities for effective, long-term substrate protection.

Anti-Corrosion Polyurethane

Polyurethane coatings are often used for the corrosion protection of steel because they are particularly economical to apply. They dry quickly & can therefore be over-coated in short intervals. They can also be applied independently of the weather conditions & are resistant to impact.

CARC Water-Based

Chemical Agent Resistant Coating (CARC) is available in a water-based solution for environmental protection.

CARC Epoxy Multi-Component

Chemical Agent Resistant Coating (CARC) is a paint commonly applied to military vehicles to provide protection against chemical & biological weapons. The surface of the paint is engineered to be easily decontaminated after exposure to chemical warfare & biological warfare agents. The paint is also resistant to damage & removal by decontaminating solutions.

CARC Polyurethane Multi-Component

Chemical Agent Resistant Coating (CARC) can be two-component polyurethane paint commonly applied to military vehicles to provide protection against chemical & biological weapons.

Moisture-Sensitive Polyurethane Multi-Component

Catalyzed polyurethane clear coats and paints are prized for their durability and versatility around the world. They are used on everything from wood cabinetry, mill work and furniture to planes, trains, and automobiles. They are usually mixed with isocyanates in the hardener. The isocyanate component of polyurethane reacts with moisture in the air and form a hard crystalline structure.

UV Material Epoxy Multi-Component

UV-resistant epoxy systems mixed with hardener cure faster & in moist conditions.

UV Material 100% Solid

UV coatings can be formulated up to 100% solids so that they have no volatile component that contributes to pollution.

UV Material Water-Based

Water-based UV coatings can be considered aesthetically equivalent to bi-component acrylic & polyurethane solvent-based coatings. The range is composed of both pigmented & transparent products.

UV Material Epoxy

UV curable epoxy systems do not require the addition of curing agents. They cure within minutes, or even seconds, and have unlimited working times.

UV Material Polyurethane Multi-Component

The UV polyurethane multi-components are especially designed for very strong UV stability. Mixing with hardener gives very high durability & UV resistance.

UV Material Polyurethane

The UV polyurethanes are especially designed for UV stability, The coating is long lasting, offers excellent substrate protection, provides an attractive finish & is user-friendly.

Top Coat Polyurethane Multi-Component

Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.

Top Coat Epoxy

Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.

Top Coat Water-Based

Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.

Top Coat Polyurethane

Polyurethane Top Coat gives a durable, high gloss finish.

Acid Catalyst Polyurethane Multi-Component

Multi-Component Epoxy Acid Catalyzing (AC) systems require a hardener or catalyst to dry/cure, which works by starting & maintaining the binder's curing process until the chemical reaction is complete. The solvent evaporates prior to & during the chemical reaction concluding a final film of lacquer, paint or filler. The catalyst is moisture-sensitive and requires a Flowmax® technology protection.

Acid Catalyst Epoxy Multi-Component

Multi-Component Epoxy Acid Catalyzing (AC) systems require a hardener or catalyst to dry/cure, which works by starting & maintaining the binder's curing process until the chemical reaction is complete. The solvent evaporates prior to & during the chemical reaction concluding a final film of lacquer, paint or filler. Curing times of AC products can be dramatically accelerated with heat application.

Solutions